Tame your toilet with a Toilet TummyTM. The Toilet TummyTM is a globally recognized water saving product that’s effective, low in cost, maintenance free and user friendly. This proven waste water solution has sold over 2 million worldwide. Invented 20 years ago, millions have been sold and remain in successful operation saving water every day. The Toilet TummyTM is the least complex and easiest to use toilet tank water saving product; just fill with water and hang on the inside of the toilet tank wall then forget about it… It is estimated that approximately 40% of household water is used by flushing the toilet. Much of this water is wasted. A toilet tummy can reduce the amount of water used when you flush by 2 litres. If you install one on either side of the cistern you can save up to 4 litres per flush. The Toilet TummyTM is lightweight, and never needs maintenance. With the average person flushing a minimum of six times a day the Toilet Tummy’sTM water savings add up. **Same day dispatch for all orders received before 3pm GMT** Installation: Carefully remove top of your toilet cistern and place aside. Fill your toilet tummy as close to the fill line as possible with water from the sink. Hang the filled Toilet Tummy on the left side of the tank. Flush toilet. If the Toilet Tummy interferes with any moving part in the tank, move to another location in the tank, re-hang and flush again. Before replacing the tank top, check the water level. The fill line on the back of the tank usually marks the right level, approximately 0.5 Inch below the top of the standpipe. If the water is higher, adjust the float to lower it a bit. For larger volumes please message us via Amazon for a quote. Thank you!
Save Water, Save Money
20 Years Old with Over 2 Million Sold